Factory Sells Hot U Pressure Ball Toy Sponge Foam Pressure Resistant Round Ball Children's Toy

What they will choose to cooperate with Fubo packaging, in fact, we all know that choosing children's toys, should pay attention to the following points

1: Environmentally friendly, odorless, there will be no irritating smell to stimulate the child's respiratory tract

2: Delicate, soft, will not hurt the child's skin

3: do not fade, because children like to put on their hands when playing, clothes, etc., can not have the phenomenon of fading pilling

4: Anti-static, because EVA toys may cause static electricity when they are rubbed, resulting in damage to children, so color EVA needs to be anti-static

4: The color type requires more, and it can have better results

In view of the above problems, Fubo engineering department and everyone one by one analysis

1: First look at the foaming principle of EVA, mainly made of EVA and low-density polyethylene as raw materials, and then add the corresponding filler, foaming agent, bridging agent, lubricant, etc., through a certain high temperature compression, release the formed sheet. And then in accordance with the requirements of the customer processing into the corresponding finished products. Blowing agent is generally used high temperature blowing agent (polyurethane rigid foam combination)) filler is generally used calcium carbonate, bridging agent is generally used DCP(di-S-octyl phthalate), and tasteless BIPB is used, from these raw materials, it does not have too much stimulation to harm the body of children. In order to save costs, some manufacturers will increase scraps in the foaming process, which can greatly reduce the cost of EVA and the smell, and have certain harm to children. Fubo packaging guarantees formal channels for EVA raw materials, and has environmental protection related certificates.

2: delicate, soft, increase the lubricant generally use stearic acid things, add a little weight, 0.5PHR, can make EVA products more soft, more feel. And some manufacturers will not necessarily increase this embellishing agent, so EVA has A material, AB material, B material, C material and so on. Fubo packaging can ensure the color EVA toys, the use of A material products. Unless the client wants something else.

3: Because the principle of EVA foaming is formed at high temperature, and there is a certain viscosity, the product comes out. There will be no fading phenomenon.

4: The antistatic agent is added in the foaming process of EVA. The antistatic agent is basically MS mixture, and the composition is relatively complex. The product comes out with anti-static function. After EVA comes out, Fubo Packaging Engineering department must measure the static electricity of the product with an electrostatic tester or a resistance tester. Generally, 6-10 meets the requirements.