EVA Foam lining - High difficulty and large size EVA engraving

   Large size and difficult EVA Foam packaging liner engraving successfully shipped, today the company business to Xiaobian a large EVA liner, drone center plate. You can look at the dimensions of this carved EVA, 150 long, 80 wide, 60 high. General engraving machine has not such a long table, Fubo packaging EVA engraving machine, the maximum size can be 2 meters long, 1 meter wide. This is just from the outside to watch, in fact, to carve up, need to be divided into several layers to process, the next Xiaobian will share with you, EVA lining, EVA engraving this drone center plate how to make. 1: First of all, because it is anti-drone electronic products, the first choice is to choose anti-static EVA, industrial drones are very heavy, heavy up to 100 pounds, so the thickness of EVA material to choose more than 30 degrees of material. And it has to be fireproof, odorless EVA material.

2: After material selection, cut according to the approximate size provided by the customer, look at the customer's 3D drawings, a total of 5 layers of different shapes for engraving, and then 5 layers of different shapes for adhesive. The raw material 50MM thick needs to be opened into 5 pieces of 10MM. Fubo packaging has its own chip machine, which the general traders do not have, which can save costs for our customers. EVA foam factory has such advantages.

3: After the size of the material is ready, the carving begins. The carving master, according to the drawings, sets the X,Y,Z of each layer. Then we feel strange. You can take a look at this picture, the use of computer programming, data through USB or LAN transmission to the PLC, PLC and then to the servo motor signal, the motor receives the signal to drive the cutting tool of the engraving machine, the cutting tool according to the XYZ compiled to carve EVA material, to achieve the shape required by customers.